Henny Penny MP-944 User Manual download pdf (Page 13)

Model MP-941/942/943/944

3-5. CLEANING (Continued) 5. Clean the interior of the cabinet thoroughly with a

cloth and soapy water.

Do not use steel wool, other abrasive cleaners or

cleaners/sanitizers containing chlorine, bromine,

iodine or ammonia chemicals, as these will

deteriorate the stainless steel material and shorten

the life of the unit.

Do not spray the unit with water, such as, with

a garden hose. Failure to follow this caution could

cause component failure.

6. Wipe down the exterior of the cabinet with a damp

cloth. Avoid getting water in the area of the control

panel.

7. Replace the drawers.

8. If the unit is to be left off, leave the drawers open

two or three inches.

3-6. OPERATION AND

Unit Operation

PROGRAMMING

1. Turn POWER switch to the ON position.

2. The display will show the time of day, or “ON”.

Press and hold any of the drawer buttons to view the

actual temperature of the drawer.

Time of Day Programming

Press and hold the SET button while using the UP

and DOWN buttons to set the desired time. When

the SET button is released the time will be saved.

Temperature Setpoint Programming

1. Press and hold the appropriate drawer button for 6

seconds. The actual temperature will be shown first

followed by the flashing setpoint temperature.

3-4 203

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

No comments

Henny Penny MP-944 User Manual Page 13