Henny-penny CW-114 User Manual

Henny PennyDisplay Counter WarmerModel CW-216/CW-114TECHNICAL MANUAL

Model CW-216/CW-1142-3. LIGHT BULB 3. Replace the light bulb with a Westinghouse(Continued) #60A19/35, 130 Volt bulb.If this bulb is not avail

Model CW-216/CW-1142-5. CLEANING WATER 3. Remove the control side end panel.STRAINER(Continued)4. Remove the hex cap at the bottom of the water

Model CW-216/CW-1142-6. WATER STRAINER 1. Remove electrical power supplied to the cabinet.(REPLACEMENT)To avoid electrical shock or property da

Model CW-216/CW-1142-7. WATER VALVE 4. Check across terminals of the water valve with an ohmmeter.(Continued) The meter reading should be 600-6

Model CW-216/CW-1142-8. FLOAT SWITCH 1. Remove electrical power supplied to the cabinet.To avoid electrical shock or property damage, move the

Model CW-216/CW-1142-9. LIGHT SWITCH 1. Remove electrical power supplied to the cabinet.To avoid electrical shock or property damage, move thep

Model CW-216/CW-1142-10. POWER SWITCH 4. Remove the nut from the control panel side of switch and (Continued) remove switch.5. Install a new

Model CW-216/CW-1142-12. INFINITE SWITCH 1. Remove electrical power supplied to the cabinet.To avoid electrical shock or property damage, move

Model CW-216/CW-1142-13. THERMOSTAT 4. Remove the thermostat knob by loosening the set screw(Continued) and pulling it off.5. Remove the sensor

Model CW-216/CW-1142-14. INDICATING LIGHT 5. Install a new light by pushing the light through the control (Continued) panel until the light sna

Model CW-216/CW-1142-16. CONTACTOR 1. Remove electrical power supplied to the cabinet.To avoid electrical shock or property damage, move thepow

Model CW-216/CW-1142-18. WATER PAN HEATER 1. Remove electrical power supplied to the cabinet.To avoid electrical shock or property damage, move

Model CW-216/CW-1142-19. RADIANT HEATER 3. Remove the electrical wires from the heater. Check with an (Continued) ohmmeter across end terminal

Model CW-216/CW-1142-21. HIGH LIMIT 1. Remove electrical power supplied to the cabinet.SWITCHTo avoid electrical shock or property damage, move

Model CW-216/CW-1142-16 1092-22. WIRING DIAGRAMS

Model CW-216/CW-114109 2-172-22. WIRING DIAGRAMS (Continued)

Model CW-216/CW-1142-18 1092-22. WIRING DIAGRAMS (Continued)

Model CW-216/CW-114109 2-192-22. WIRING DIAGRAMS (Continued)

Model CW-216/CW-1142-20 1092-22. WIRING DIAGRAMS (Continued)

Model CW-216/CW-114109 2-212-22. WIRING DIAGRAMS (Continued)

Model CW-216/CW-114TABLE OF CONTENTSSection PageSection 1. TROUBLESHOOTING ...

Model CW-216/CW-1142-22 1092-22. WIRING DIAGRAMS (Continued)

Model CW-216/CW-114109 2-232-22. WIRING DIAGRAMS (Continued)

Model CW-216/CW-1142-24 807

Model CW-216/CW-114305 2-25

Model CW-216/CW-1142-26 305

Model CW-216/CW-114207 2-27LIMITED WARRANTY FOR HENNY PENNY EQUIPMENTSubject to the following conditions, Henny Penny Corporation makes the fo

Model CW-216/CW-114SECTION 3. PARTS INFORMATION3-1. INTRODUCTION This section lists the replaceable parts of Henny Penny ModelCW-216 and CW-114

Model CW-216/CW-1143-4. HOW TO ORDER The following table has been provided as a sample format for you(Continued) to use in preparing your spare

Model CW-216/CW-114203 3-3

Model CW-216/CW-1143-9. PARTS LISTItem Part No. Number Description Qty.1 22525 Panel - Top End 22 SC02-023 Screw #8-B x 3/8” PH Thd. *3 23295 B

Model CW-216/CW-1143-9. PARTS LIST (Continued)Item Part No. Number Description Qty.43 22578 Deflector - Heater 2√√√√√ 44 22644 Heater - Radiant

Model CW-216/CW-1143-9. PARTS LIST (Continued)Item No. Part No. Description Qty.83 22891 End Channel Assembly (3-1/2” top) - SN: IY503JB &

Model CW-216/CW-114SECTION 1. TROUBLESHOOTING1-1. INTRODUCTION The section provides troubleshooting information in the form of aneasy to read

Model CW-216/CW-114PROBLEM CAUSE CORRECTIONTHERMOMETERA. Reading doesnot matchactualtemperatureA. Product notholdingtemperature• Faulty therm

Model CW-216/CW-114PROBLEM CAUSE CORRECTIONWATER SYSTEMA. Water willnot fillA. Lights willnot turn on• Check float switch per Float SwitchSec

Model CW-216/CW-114PROBLEM CAUSE CORRECTIONHEATING SECTIONA. Water willnot heatB. Water will notreach desiredtemperature• Replace contactor p

Model CW-216/CW-114SECTION 2. MAINTENANCE2-1. INTRODUCTION This section provides procedures for the checkout and replace-ment of the various p