Henny-penny HMI-103 User Manual download pdf (Page 7)

Model HMI-103/105

2-1. INTRODUCTION This section provides the installation instructions for the Henny

Penny Island Warmer.

Installation of this unit should be performed only by a

qualified service technician.

Do not puncture the skin of the unit with drills or

screws as component damage or electrical shock

could result.

2-2. UNPACKING The Henny Penny Island Warmer is tested, inspected and

expertly packed to insure arrival at its destination in the best

possible condition. The unit has been bolted to a wooden skid.

All items have been packed and taped inside of the unit. The

warmer is then packed inside a triple wall corrugated carton

with sufficient padding to withstand normal shipping treatment.

Any shipping damages should be noted in presence of

delivery agent and signed prior to his or her departure.

To remove the unit from the carton, you should:

1. Carefully cut banding straps.

2. Open flaps of carton and remove packing.

3. Lift carton from unit.

4. Remove four bolts mounting the warmer to the skid.

5. If installing the unit to a base, use the bolts provided to

mount the unit to the base.

6. Unpack doors and pan supports and install.

7. The unit is now ready for location and set-up.

203 2-1

SECTION 2. INSTALLATION

1 2 3 4 5 6 7 8 9 10 11 12 ... 18 19

No comments

Henny-penny HMI-103 User Manual Page 7