Henny-penny EEE-143 User Manual download pdf (Page 57)

Model EEE-141,142, 143, 144

6-2. CLOCK SET 1. Press and hold the button for 5 seconds until “LEVEL 2”,

followed by, “SP PROG” and “ENTER CODE” show in the

display.

2. Press the button again and “CLK SET” and “ENTER

CODE” flash in the left display.

3. Enter code 1, 2, 3 (first 3 product buttons).

4. “CS-1 ENTER DATE MM-DD-YY” flashes in the left display.

Use the product buttons to set the date in the right display.

5. Press button and “CS-2 ENTER TIME” flashes in the left

display and the time flashes in the right display. Press the

or , or use product buttons, to change the time.

6. Press button and “CS-2 ENTER TIME” flashes in the left

display and “AM” or “PM” flashes in the right display. Use the

or buttons to choose AM or PM.

7. Press button and “CS-3 TIME FORMAT” flashes in the

left display and “12-HR” or “24-HR” shows in the right display.

Use the or buttons to choose a 12 hour time format

or a 24 hour time format.

8. Press button and “CS-4 DAYLIGHT SAVING TIME”

flashes in the left display. Use the or buttons to choose

daylight saving time for your area: 1.OFF; 2.US (2007 &

after); 3.EURO; or 4.FSA (US before 2007).

The Data Logging, Heat Control, Tech, Stat and Filter Control

Modes are advanced diagnostic and program modes, mainly for

Henny Penny use only. For more information on these modes,

contact the Service Department at 1-800-417-8405 or 1-937-

456-8405.

6-3. DATA LOGGING, HEAT

CONTROL, TECH, STAT,

AND FILTER CONTROL

MODES

609 6-10

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 63

No comments

Henny-penny EEE-143 User Manual Page 57