Henny Penny PFG-691 User Manual download pdf (Page 2)

Model 691

7. Remove the counterweights, which are strapped to the

pallet under the fryer, from the pallet.

Do not drop. The counterweights weigh approximately

18 lbs. (8.1 kg) each. Handle with care, or personal

injury could result.

8. Remove rear service cover.

9. Load the 7 weights into the counterweight assembly.

10. Replace rear service cover.

To avoid personal injury and assure safe operation of

unit, rear service cover must be in place.

11. Cut warning tags from the lid assembly. The lid may now

be unlatched.

12. Remove the accessories from inside the filter drain pan.

The fittings for installing the gas line are in a separate box,

along with the accessories, in the filter drain pan.

13. Prepare the deadweight valve for operation

The metal shipping support is placed within the deadweight

assembly housing to protect the deadweight orifice and dead-

weight during shipment. This support must be removed prior

to installation and start-up.

a. Unscrew the deadweight cap.

b. Remove the deadweight.

c. Remove and discard the shipping support.

d. Clean the deadweight orifice with a dry cloth.

e. Carefully place deadweight over deadweight orifice.

Replace deadweight cap, finger tight.

14. Remove the protective paper from the fryer cabinet.

Clean exterior surface with a damp cloth.

2-2 1104

2-2. UNPACKING

INSTRUCTIONS

(Continued)

1 2 3 4 5 6 7 ... 10 11

No comments

Henny Penny PFG-691 User Manual Page 2